KRETE 'O' BOND AR

An Entremely Versatile Acrylic Bonding Agent & Admixture Designed to Improve. The Adhesion & Durability for use with all Cementitious Materials.

KRETE 'O' BOND AR KRETE'O'BOND AR is ready to use, non-reemulsifiable acrylic admixture and versatile bonding agent designed to improve the adhesion and durability of concrete, masonry, stucco, terrazzo and OPC-sand mixes to horizontal and vertical concrete and other surfaces. KRETE'O'BOND AR can be used to pre-treat substrates as an adhesionpromoting agent and as a primer/ sealer for decorative coatings. When used as an admixture, KRETE'O'BOND AR provides increased abrasion, compressive, tensile and flexural strengths of mortars. It reduce the water/cement ratio, impact and crack resistance. can be used with confidence on all exterior and interior surfaces.

PRODUCT IDENTITY

Type : Acrylic Polymer Latex
Form : Liquid White
Bulk density : 1.02 + 0.05 Kg/L

PERFOMANCE

PH Value : 7 - 9
Solid Content : ≥ 38 %
Tensile Strength : ≥ 2.5 N/mm² (Concrete Failure)
Adhesion Strength : ≥ 1.5 N/mm² (Concrete Failure)

USAGE

  • Repairs to spalled and damaged concrete
  • As a structural bonding agent: - New to old concrete, Renders to brick or concrete walls, sealing walls, bathrooms and kitchen ceilings before painting
  • As a bonding agent for uses in repairing and plastering
  • For Fixing or re-fixing of slip bricks, tiles, stones & marble bedding
  • Rendering and coating layers
  • Toppings and levelling concrete surfaces

APPLICATION

Priming : KRETE 'O' BOND AR is used for pre-treatment of porous but firm surfaces of concrete, aerated concrete, plaster, screeds, as an adhesion promoting and sealing agent. Its characteristics will increase the bonding capability of the water proofing system.
Bonding Slurry : Apply KRETE'O'BOND AR at a rate of 4 m²/ Ltr. (While using a standard mix @ (1:1) / (Krete'O'Bond ALL: Portland cement) over the old concrete and then pour the fresh concrete 5-10 min after achieving a Tacky finish.
Rendering : Mixing Ratio 5 Ltr. KRETE'O'BOND AR + 15 Ltr. water + 50 kg cement. Add the Cement to the KRETE'O'BOND AR and mix well using a slow speed mixer to achieve and even and creamy paste. Apply the paste on the pre-wetted substrate at a thickness of 1-2 mm.

STORAGE

KRETE'O'BOND AR remains stable for 18 months from the date of
production inside its original sealed packing. It can be stored in protected
dry area in temperature between +5 °C and + 45 °C.

PACKING

1, 5, 20, 50 Ltr.