KRETE’O’ BOND ALL

UNIVERSAL POLYMER BONDING AGENT FOR WATERPROOFING, ADMIXTURE AND REPAIRING BASED ON STYRENE BUTADIENNE RUBBER.

Krete 'O' Bond ALL is styrene-butadiene rubber (SBR) latex specifically designed for high bonding and use with many cementitious mixes like concrete, mortar and waterproofing. It forming a reinforcing polymer matrix within various cementitious mixes. It gives higher adhesion, durability and tensile strength while it is mixed with cement mixtures.

PERFOMANCE

Solid Content : 42%
Compressive strength : > 35.0 N/mm2 (ASTM C 109)
Flexural Strength : >14.0 N/mm2 (ASTM C 78)
Tensile Strength : >3.0 N/mm2 (ASTM C 190)

USAGE

  • As a bonding agent for uses in repairing and plastering
  • Bonding of new concrete to old concrete, masonry stone work, plastering
  • For Fixing or re-fixing of slip bricks, tiles, stones & marble bedding
  • Rendering and coating layers
  • Toppings and leveling concrete surfaces
  • Thin sets, terrazzo, stucco and bonding coats
  • Bridge decks, highways and parking decks

PRODUCT IDENTITY

Type : Styrene Butadiene Rubber Latex Emulsion
Form : Liquid White
Specific Gravity : 1.02 + 0.05 Kg/L

APPLICATION

Mixing Ratio : 5 – 5.5 L of water for 20 kg
Density of the Mix : 1.65 ± 0.05 kg/L
Application Temperature : From +5°C up to +35°C
Pot Life : 2 hours Open Time : 20 min
Correction Time : 20 min
Walkability : After 24 hours
Grouting on Wall : After 10 -12 hours
Grouting on Floor : After 24 hours
Coverage : Bonding Slurry 4 - 5 m2/ Ltr.
(While using a standard mix @ (1:1) Krete'O'Bond ALL : Portland cement Genral Mixing Ratio 5 Ltr. Krete’O'Bond ALL + 15 Ltr. water + 50 kg OPC + 150 Kg Sand

STORAGE

KRETE'O'BONDALL remains stable for 12 months from the date of production inside its original sealed packing. It can be stored in protected dry area in temperature between +5 °C and + 42 °C.

PACKING

41, 5, 20 Kg