KRETE 'O' FIX PEARL

READY TO USE CEMENTITIOUS TILE ADHESIVE WITH LOW SLIP & EXTENDED OPEN TIME

KRETE 'O' FIX PEARL is ready to use cementitious tile adhesive with low slip and extended open time. Can be used for tile bonding at a thickness up to 10 mm for internal and external floors and walls. It is suitable for the installation of medium size ceramic, porcelain tiles, moisture stable natural stones etc. on both floors and walls in internal and external areas. Krete 'O' Fix Pearl 01 can be used for fixing tile over tile (TOT) and for the fixing of small to medium size tiles.

PRODUCT IDENTITY

Color : Grey
Form : Powder
Bulk density : 1450 Kg/m3

PERFOMANCE

Tensile Adhesion Strength : ≥0.75 N/mm2
After Water Immersion: ≥0.5 N/mm2
Slip Resistance : 60 minutes @ 28 % water
Open Time : ≥0.5 N/mm2 at 25 minutes

USAGE

  • Internal floors & wall areas.
  • wet areas like kitchen, bathrooms and WC.
  • Bonding of tiles on existing floor tiles.
  • Properly cured concrete and cement screeds.
  • Non-absorbent substrates (after suitable primer application).
  • Plaster and masonry mortars.
  • RCC walls & floors.

APPLICATION

Mixing Ratio : 5 – 5.5 L of water for 20 kg
Density of the Mix : 1.65 ± 0.05 kg/L
Application Temperature : From +5°C up to +35°C
Pot Life : 2 hours Open Time: 20 min
Correction Time : 20 min
Walkability : After 24 hours
Grouting on Wall : After 10 -12 hours
Grouting on Floor : After 24 hours
Coverage : 3 mm bed thickness – approx. 3 Kg/ m2
                6 mm bed thickness – approx. 6 Kg/ m2

STORAGE

KRETE'O'FIX PEARL remains stable for 12 months from the date of production inside its original sealed packing. It can be stored in protected dry area in temperature between +5 °C and + 42 °C.

PACKING

20 & 40 kg bags

CONTACT

Write to us,
we are at your service

If you wish to receive additional information and clarification or
even if you are just curious and would like to find out Kretechem,
send us a message and we will get in touch with you.

contacts